Content Comparison

...

1. Enter a Report Header.
2. Show All option: If you want to print all funds, including those that don't have any activity, select Show all. Otherwise, leave this box unchecked.
3. Click on Start.
4. When the system displays the Activity Summary dialog box, verify that the Image Removed information the  information is correct and click on OK to continue.
   
   
5. Image Added
   
    The  
   
   
6. The system loads the report (this may take a while). Upon completion, the status bar in the lower-left corner will show Fund Activity Report complete.
7. Verify that all funds are in balance.
   1. NOTE: If a message in the lower-right corner of the screen states that funds are out of balance, contact your Library Systems Manager.
8. Click on Print from the toolbar to Print the Fund Activity Report.
9. When the report has been sent to the printer, the following message displays: Printout is OK
   1. If no funds are out of balance and the report printed properly check the Printout is OK box to make the Clear payment history box become active.
   2. If the printout is NOT okay, do NOT check the Printout is OK box, and click on OK. Resolve the problem, and return to this step in the fiscal close.
10. Check the Clear payment history box and click on OK.
11. The status bar at the bottom of the screen displays: Payment history file cleared.
    1. NOTE: You must clear the payment history file to continue the fiscal closing process.
12. Click on Next to go on to the Creating Fund and Statistical Reports section.

...

1. The FIRST time you complete and process the information on this screen, check the box: Archive "Current Funds" amounts to "Old Funds", and "Hierarchies" to "Old Hierarchies".
2. Using the create lists that you created in the Preparation on Fiscal Close Day section above, to the following
   1. Select "Review" from the drop-down menu
   2. Select the appropriate review file in the "Review File" drop-down menu.
   3. Click on the "Limit to status" box, and select the status that applies to the review file. For example, if your review file includes order records that contain paid monographs (status "a") with fund codes from the current fiscal year (begin with a "c"), then in the Limit to status box enter "a".
   4. Do not check the Change Status, unless you want to also change the status of the order records in addition to the fund codes
       
   5. Do not check the Change fund for partials boxes, unless you have order records that have partial payments (status "q" or "e"). NOTE: If you don't select this option, these records will be put in a review file, and you can update each record later.
3. The table at the bottom of the screen lists all the current funds. For each of the current fund codes in the FROM FUND column that begins with "c", add the corresponding previous year fund code which begins with a "p" in the TO FUND. For example, if the current fund is "cbind" in the FROM FUND column, enter "pbind" in the TO FUND column.
   1. NOTE: Do not add a code for any of the previous year funds (i.e. if they begin with a "p") that appear in the FROM FUND column. Leave the TO FUND column blank.
   2. NOTE: You only have to do this process once for all the review files you are updating.
4. Once you have proofed your work in the TO FUND column, click on Process. This will do the following:
   1. Copy the current funds and hierarchies to the Old Funds and Old Hierarchies section of the Fund mode.
   2. Change the fund code in order records in the review file you selected as you specified in the TO and FROM columns.
    
5. When processing completes the Reports tab at the top of the screen will display a summary of changes and a section for encumbrance changes.
   1. NOTE: After a fund has been processed, its original amounts cannot be restored.
6. Click on Print on the toolbar to print the report.
7. WARNING!!
8. UNCHECK the Archive "Current Funds" amounts to "Old Funds", and "Hierarchies" to "Old Hierarchies"

...

1. OR, if the new year's appropriations are the same as the previous year's or there are only minor adjustments, DO NOT check the appropri

   Anchor
   _GoBack _GoBack

   ations box so that the appropriations for both the current and previous funds will not be changed. You can Adjust both current and previous fund appropriations in the next step. Be sure to zero-out expenditures and encumbrances.Check all the boxes in the Appropriations for all funds, Expenditures for all funds, and Encumbrances for all funds.
   1. NOTE: You will be manually entering all the amounts for the current year's funds in the Adjust Funds section below.
2. Check the # Orders Year-to-Date for all funds box to reset the year-to-date number of orders to zero for the new year's funds.
    
3. Check the # Payments Year-to-Date for all funds box to reset the year-to-date number of payments to zero for the new year's funds.
4. Click Process. The amounts and fields on the fund records are reset to zero.
   1. NOTE: After a fund has been processed, its original amounts cannot be restored.
5. Click on Next and go to the Adjust Funds section.

...