Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 4 Current »

Installing Zebra Technologies Print Drivers

  • Go to https://www.zebra.com/us/en/support-downloads/desktop/gx430t.html
  • Scroll to the middle of the page and click on the Drivers tab
  • Click on the download link for the "ZebraDesigner driver 32/64 bit. Certified for Windows" file for Windows 7 and Windows 10.
  • Click on the "Accept and Begin Download Now" button
  • Save the .exe file to your desktop
  • Open the .exe file
  • Click Next
  • Use the default extraction location "C:\"
  • Click Next, Next, Next
  • Uncheck "Run the printer installation wizard" and "View release notes"
  • Click Finish to install the drivers

Setting up Serials Label Printer Profile

  • Click the Windows Start button
  • Choose Devices and Printers
  • Click Add a printer
  • Choose Add a local printer
  • Click Next
  • Choose Create a new Port
    • Standard TCP/IP Port
  • Click Next
  • For Hostname or IP address, enter the printer's IP address
  • Click Next
  • For Device Type, select Standard → Generic Network Card
  • Click Next
  • For Manufacturer, choose ZDesigner
  • For Printers, choose the latest version of Zdesigner GX430t
    • Do not choose the GX430t (EPL)
  • Click Next
  • Change the printer name to Serials Checkin ZDesigner GX430t (Or something else easily distinguishable from other printers that you have set up on your computer)
  • Select Do not share this printer
  • Click Next
  • Uncheck Set as the default printer
  • Click on the Print test page
  • Click Finish
  • Click the Windows Start button
  • Open Devices and Printers
  • Right Click Serials Checkin ZDesigner GX430T
  • Click on Printing Preferences
  • Configure the Options tab according to below image:



  • Open on the Advanced Setup tab
  • Under Tracking Mode, select Web Sensing

  • Click Apply
  • Click OK
    • Sierra has to be rebooted if its open during the printer install or configuration

Sierra Setup

 

  • Go to File →  Sierra Printer  →  Label Printer
  • Select Local Printer
  • For the General Tab, select Serials Checkin ZDesigner GX430t

  • For Page Setup tab, change margins to 0

  • For Format tab, change format to Graphic, and font size to 10

  • Click OK and Restart Sierra
  • No labels