Installing Zebra Technologies Print Drivers

THIS CAN BE DONE LOGGED IN TO THE non-ADMIN account
Go to https://www.zebra.com/us/en/support-downloads/desktop/gx430t.html
Scroll to the middle of the page and click on the Drivers tab
Click on the download link for the "ZebraDesigner driver 32/64 bit. Certified for Windows" file for Windows 7 and Windows 10.
Click on the "Accept and Begin Download Now" button
Save the .exe file to your desktop
Open the .exe file
Click Next
Use the default extraction location "C:\"
Click Next, Next, Next
Uncheck "Run the printer installation wizard" and "View release notes"
Click Finish to install the drivers

Setting up Serials Label Printer Profile

Click the Windows Start button
Choose Devices and Printers
Click Add a printer
Choose Add a local printer
Click Next
Choose Create a new Port
- Standard TCP/IP Port
Click Next
For Hostname or IP address, enter the printer's IP address
Click Next
For Device Type, select Standard → Generic Network Card
Click Next
For Manufacturer, choose ZDesigner
For Printers, choose the latest version of Zdesigner GX430t
- Do not choose the GX430t (EPL)
Click Next
Change the printer name to Serials Checkin ZDesigner GX430t (Or something else easily distinguishable from other printers that you have set up on your computer)
Select Do not share this printer
Click Next
Uncheck Set as the default printer
Click on the Print test page
Click Finish
Click the Windows Start button
Open Devices and Printers
Right Click Serials Checkin ZDesigner GX430T
Click on Printing Preferences
Configure the Options tab according to below image:

Click Apply
Click OK
- Sierra has to be rebooted if its open during the printer install or configuration